Belimo Damper Actuator Energy Savings Estimator

Belimo damper actuators provide significant energy savings from their low power consumption. Belimo has developed the Damper Actuator Energy Savings Estimator to help quantify the savings versus competitive equivalents for prospect projects using basic variables. These savings are made possible from Belimo’s patented motor technology and Application Specific Integrated Controller (ASIC) which monitor and control motor rotation to measure actuator position and optimize efficiency and reduce power use in hold conditions.

• The following link provides you access to the Savings Estimator

Belimo Energy Valve Savings Estimator

The Energy Valve Savings Estimator Tool compares current plant Delta T against your Delta T improvements from installing Belimo Energy Valves and calculates energy and cost savings benefits in an easy to read one-page format. The Belimo Energy Valve is an IoT cloud-connected pressure independent valve that monitors water coil performance and energy consumption while managing the delta T.

• The following link provides you access to the Savings Estimator

Hydronic Simulator Tool

The Belimo Hydronic Simulator™ is a tool that simulates a hydronic system in a 4-story building with five terminal units on each floor. All terminal units, branches, and the raiser have a manual balancing valve that allows adjusting based on the valve opening. The Simulator identifies and illustrates when the system needs to be balanced and how the adjusting of the valve could impact the entire system. The main purpose of the Belimo Hydronic Simulator is to educate on the importance of why pressure-dependent valves are not recommended in a dynamic system.

The Source for HVAC Actuator and Valve Replacement Solutions

Belimo Retrofit App allows you to quickly and easily find HVAC replacement solutions for valves and actuators. Valves and actuators are responsible for ensuring reliable, functioning hydronic and air control HVAC systems all over the world. With innovative technology, verified quality, and easy handling during installations and operation, they boost the performance and efficiency of integrated building technology. The Belimo Retrofit App provides air and water retrofit application solutions with direct coupled or remote access linkages and energy efficient actuators.

• Store Projects
• Email Selections
• Access Resources

Superior Application Data Access

With a smartphone, the Belimo Assistant App provides easy programming, commissioning, and troubleshooting of Belimo products with integrated Near Field Communications (NFC). Some of the functions include device type, position, operating data, and setting parameters. NFC provides the data access you need to ease installation and ensure optimal performance.

Google Play and the Google Play logo are trademarks of Google Inc.

Now Available as a Standalone Windows Application

The PIV Energy Modeling Tool calculates the energy savings when using Pressure Independent Characterized Control Valves (PICCV) and Electronic Pressure Independent Valves (ePIV) in comparison to pressure dependent valves (Characterized Control Valves (CCV) or globes).

• Minimum variables are needed to obtain a quick comparison of energy usage
• Uses hourly calculations in the background to obtain the different HVAC loads with predefined building types along with weather data and climate zone
• Provides calculation tables to enable modeling as part of an Exceptional Calculation Method
• Complies with ASHRAE 90.1-2010 Appendix G regarding requirements for simulation programs

Accurately View Energy Savings using Pressure Independent Valves

With the new Belimo PIV Energy Modeling Plug-in, mechanical designers can accurately determine the energy savings associated with PI control valves. And they can share this information with building owners in a way that is valuable and real to them! This executable file installs new pump performance curves that allow owners to compare a system design with and without pressure independent control valves. With this new modeling capability, engineers can:

• Compare the annual energy consumption of two models to estimate the savings achieved through pressure independent control valves
• Calculate a reliable ROI for Pressure Independent Control Valves
• Generate necessary documentation for LEED points achieved under Energy and Atmosphere Credit 1: Optimize Energy Performance

Computer Requirements:

• Microsoft Windows XP, Windows XP Professional, or Windows 7
• Trane Trace 700, Version 6.2.X and/or eQuest, Version 3.6X

A Quick and Efficient Way to Adjust Cv/GPM

Belimo ZoneTight Zone Valves offer you the option to field adjust to the desired flow to meet system design requirements. With the online Flow Capacity Application Tool, simply select your valve model; enter your desired Cv and Delta P for pressure dependent valves or GPM for pressure independent valves, and click submit. It is that easy.

PC-Tool is a universal software application for setting, commissioning, monitoring and evaluating communications with Belimo actuators.

Multi-Function Technology, only from Belimo, allows you to create custom solutions for individual applications, using the same programmable actuator. You can modify voltage control, time proportional control, floating point, on/off and feedback signals too. In addition, MFT makes it easy to set parameters for running time, mechanical working range, address, status and diagnostics.

The ZTH directly connects to the Belimo Multi-Function Technology (MFT) series actuator offering the ability to quickly change the parameters of the actuator, such as control input, control feedback, runtime, and minimum and maximum values.